BMW TPMS Reset: 6 steps

1. Check the tire pressure
   Inflate all four tires to the recommended pressure shown on the tire-pressure label, usually located inside the driver’s door frame.
2. Turn on the vehicle
   Start the engine or switch on the ignition. Keep the vehicle parked before beginning the reset.

3. Open the vehicle settings
   On the iDrive screen, select:

   CAR → Vehicle Status → Tire Pressure Monitor

   On some BMW models, the menu may appear as:

   My Vehicle → Vehicle Status → Tire Pressure Monitor

4. Start the reset
   Select Tire Settings, Perform Reset, or Reset Tire Pressure, and then confirm the reset.
5. Drive the vehicle
   Drive at a steady speed, preferably above 20 mph or 30 km/h. The system will automatically relearn the tire-pressure values.
6. Wait for completion
   The reset progress will appear on the display. Once the process reaches 100%, the new tire-pressure values have been stored successfully.

Important Notes

• Do not reset the TPMS when the tires are underinflated.
• If the warning light remains on, check the tires for leaks or damage.
• The exact menu names may vary depending on the BMW model, production year, and iDrive version.