2019 BMW X3 Oil Reset: Step Method

If you’ve changed the engine oil and filter on your 2019 BMW X3, you’ll need to reset the oil service reminder manually. Follow the steps below:

1. Start the car without pressing the brake.
   Press the Start/Stop button once to turn on the ignition (accessory mode). Do not start the engine.

2. Wait for all dashboard lights to come on.
   Make sure the instrument cluster is fully powered on.

3. Press and hold the Odometer Reset button.
   This button is located on the lower-left of the instrument cluster. Hold it for about 10 seconds.

4. The service menu will appear.
   After holding the button, a menu will pop up showing various service items.

5. Use the Odometer Reset button to scroll.
   Press the button briefly to scroll through the list until you see "Engine Oil" or "Oil Reset."

6. When "Engine Oil" is displayed, press and hold the button.
   Hold it for a few seconds until "Reset?" appears on the screen.

7. Press and hold again to confirm reset.
   Once "Reset?" is shown, hold the button again until the screen confirms the reset was successful.

8. Turn off the ignition.
   Press the Start/Stop button again to turn everything off.

9. Start the engine to verify.
   Start the car and check if the oil service light has been reset.

Note:
If the reset fails or the menu doesn’t show up, ensure all doors are closed and the car is not in motion. Sometimes, multiple attempts may be needed.

Let me know if you need a version with images or a printable PDF.