2018 Audi Q5 Oil Reset - Three Methods

To reset the oil change reminder on a 2018 Audi Q5, follow these steps:

2018 Audi Q5 Oil Reset - Method 1: Using the MMI System

1. Turn on the ignition: Press the start button without starting the engine (dashboard lights up).
2. Access the menu: Press the “CAR” or “MENU” button on the MMI control panel.
3. Select settings: Navigate to “Vehicle”, then go to “Service & checks”.
4. Find the oil reset option: Select “Service intervals”.
5. Reset the oil change reminder: Choose “Reset Oil Change Interval”, then confirm.
6. Complete the reset: The system will prompt for confirmation; select “Yes”.
7. Restart the vehicle: Turn off the ignition and restart the car to check if the reminder has cleared.

Method 2: Using the Instrument Cluster Buttons (For some models)

1. Turn off the ignition.
2. Press and hold the trip reset button (located on the dashboard).
3. Turn on the ignition without starting the engine.
4. Wait for the reset message: When "Reset oil change interval" appears on the screen, release the button.
5. Confirm the reset: Press the button once or use the steering wheel “OK” button to confirm.
6. Restart the vehicle to check if the reset was successful.

Method 3: Using an OBD2 Diagnostic Tool (For advanced reset)

If the above methods do not work, you may need an OBD2 diagnostic tool such as VCDS, OBDeleven, or other OBD2 scanners:

1. Plug the OBD2 device into the vehicle’s OBD port.
2. Use the software to access the “Service Reset” menu.
3. Select “Oil Change Reset” and execute the reset.
4. Disconnect the OBD2 tool and restart the car to confirm the reminder is cleared.

After performing these steps, the oil change reminder should be successfully reset.